Confirming The Image Of The Return Video Signal On The Viewfinder - Sony HDCAM HDW-730 Operation Manual

3
Turn the MENU knob to move the t mark to the item you want to
set, and push the MENU knob.
The t mark at the left of the selected item changes to a z mark
and the z mark at the left of the setting changes to a ? mark.
4
Turn the MENU knob to select whether or not to DISPLAY the
selected window, then push the MENU knob.
4
The z mark at the left of the selected item changes to a t mark
and the ? mark at the left of the setting changes to a z mark.
5
To continue setting other windows, repeat steps 3 and 4.
6
To end menu operations, turn the MENU ON/OFF switch to OFF, or
close the cover.
4-7-9 Confirming the Image of the Return Video
Signal on the Viewfinder
You can set whether or not the image of the return video signal is
displayed on the viewfinder, using the GENLOCK page of the
MAINTENANCE menu.
1
Set the MENU ON/OFF switch to ON while pushing the MENU
knob.
The TOP menu appears.
4-94
Chapter 4 Adjustments and Settings for Recording