4-1-2 Adjusting the White Balance
Follow the procedure below to automatically adjust the white balance.
1
Adjust the switches as shown in the figure below.
4
GAIN switch:
Set as low as
possible.
If the setting on the GAIN selector or WHITE BAL switch is changed, a
message reporting the set position appears for about 3 seconds in the
setting change and adjustment progress message display area of the
viewfinder screen.
4-6
Chapter 4 Adjustments and Settings for Recording
FILTER selector
OUTPUT/DCC switch:
CAM
WHITE BAL switch:
A or B
a) When WHITE SWITCH
<B> is set to MEM on
the FUNCTION 2 page
of the OPERATION
menu
a)