Sony HDCAM HDW-730 Operation Manual page 243

Functions to be assigned to the ASSIGN 1 (push-type) switch
Function
OFF
F.MIC MONO/STEREO
LOOP REC ON/OFF
TEST OUT CHARACTER Assigns the function to switch whether or
MARKER ON/OFF
EZ FOCUS
RE-TAKE
ATW
RETURN VIDEO
LENS RET
REC SWITCH
TURBO SWITCH
ZEBRA ON/OFF
Content
Disables the switch.
Assigns the monaural/stereo switch
function when the stereo microphone is
connected to the MIC IN connector.
Assigns the Loop Rec mode ON or OFF
function. a)
not the characters are mixed to the video
signal to be output from the TEST OUT
connector.
Assigns the ON/OFF function to display all
markers. b)
Assigns the ON/OFF function of the EZ
c)
FOCUS
Assigns the RE-TAKE function to the
switch.
Assigns the ON/OFF function of auto-
tracing white balance.
Assigns the ON/OFF function to display
the image of the return video signal on
the viewfinder to the switch.
Assigns the same function as that of the
RET switch on the lens to the switch.
Assigns the VTR S/S (start/stop) function
to the switch.
Assigns the turbo gain function to the
switch.
Assigns the zebra pattern display function
to the switch.
Chapter 4 Adjustments and Settings for Recording
function.
d)
4
(Continued)
4-111