Sony HDCAM HDW-730 Operation Manual page 41

2
Shooting and recording/playback functions (3)
ws VBS/SDI OUT (video signal output) connector (BNC type)
(Only when an HKDW-702 extension board (not supplied) is
installed)
In this manual, the illustration of the camcorder which the BNC
connector is attached is used. If you do not install an HKDW-702, ignore
this connector.
This connector outputs down-converted 525i/625i signals (75-ohm
terminated) to the video monitor. The output signal can be selected as
analog composite or SDI. Refer to the FUNCTION 1 page of the USER
menu. Selecting OFF stops the converter.
For instructions on how to select the output signal, see "4-8-2 Selecting the Output
Signals" on page 4-101.
2-23
Chapter 2 Locations and Functions of Parts and Controls