Sony HDCAM HDW-730 Operation Manual page 174

Example 2: Interconnecting a number of camcorders for time code
synchronization
4
To another camcorder to be
synchronized
a) When an HKDW-702 (not supplied) is installed, the down-converted
video signal of the camcorder cannot be used as the reference signal.
When interconnecting a number of camcorders, output the HD analog
component signal (HD-Y signal) from the TEST OUT connector.
For details, see "4-8-2 Selecting the Output Signals" on page 4-101.
b) Set GENLOCK to ON on the GENLOCK page of the MAINTENANCE
menu.
4-42
Chapter 4 Adjustments and Settings for Recording
a)
TEST OUT
TC OUT
TC IN
GENLOCK IN b)
TC OUT
TEST OUT a)
GENLOCK IN b)
TC IN
TC OUT
TEST OUT a)
Reference camcorder