Sony HDCAM HDW-730 Operation Manual page 139

2
Adjust the FILTER selector to suit the lighting conditions.
ND filter
1 Clear
2 1/4 ND
3 1/16 ND
4 1/64 ND
If the setting of the FILTER selector is changed, a message reporting
the set position appears for about 3 seconds in the setting change and
adjustment progress message display area of the viewfinder screen
(in display mode 3).
3
Place a white test card under the same lighting conditions as the
subject to be shot and zoom up to it. Alternately, any white object
such as a cloth or a wall could be used.
The absolute minimum white area is as follows:
Note
Make sure there are not bright spots in the rectangle.
A
B
C
D
Chapter 4 Adjustments and Settings for Recording
CC filter
Cross filter
3200K
4300K
6300K
Rectangle centered on the
screen. The lengths of the
sides are 70% of the length
or the width of the screen.
The white object must be
within the rectangle and
have an area of at least
10% of the screen.
4
(Continued)
4-7