Using The Hfbk-Ts1 Hdv Interface Board To Input The Video And Audio Signals Mixed To The Hdv Video Equipment - Sony HD 3CCD COLOR BRC-H700 Operating Instructions Manual

Using the HFBK-TS1 HDV Interface Board to Input the Video and Audio
Signals Mixed to the HDV Video Equipment
This system allows you:
• To input the video signal of the camera to the HDV video equipment
• To input the video signal of the camera and the audio signal via the HFBK-TS1 HDV Interface Board simultaneously
to the HDV video equipment
• To perform pan/tilt and zoom operations comfortably using the joystick
System configuration
BRC-H700
Video signal
Audio line signal
Remote control (VISCA) signal
,
Notes
• You cannot operate pan/tilt and zoom with HDV video equipment connected to the i.LINK (HDV) OUT connector
on the HFBK-TS1 HDV Interface Board. Use the VISCA RS-232C or VISCA RS-422 connectors instead.
• Use AUDIO DELAY in the HDV menu of the camera to compensate for the delay between the video signal of the
camera and the audio signal input to the HFBK-TS1 HDV Interface Board (see page 26). The delay is adjustable by
STEP (approx. 24 mS).
16
System Configuration
Microphone
Microphone amplifier
i.Link cable
HFBK-TS1 HDV
Interface Board
Signal flow
HD video monitor
HDV VTR, etc. equipped
with the i.Link connector
RM-BR300 Remote Control Unit