Sony HD 3CCD COLOR BRC-H700 Operating Instructions Manual page 55

2
Remove the four screws on the bottom of the
camera to remove the four feet.
3
Attach the ceiling bracket (A) to the bottom of the
camera using the supplied four screws (3M3 × 8).
Position the f hole on the ceiling bracket (A) to the
front of the camera, align the screw holes on the
ceiling bracket with those on the bottom of the
camera, then attach the bracket to the camera.
3M3 × 8 (supplied)
Front of
camera
Note
For attaching the camera to the ceiling bracket, use
only the supplied screws. Using other screws may
damage the camera.
4
Attach the supplied wire rope to the ceiling bracket
(A).
Pass the wire rope through the fixing hole and
attach its end to the attachment hole on the bracket
using the supplied one screw (3M4 × 8).
Wire rope
(supplied)
Caution
For attaching the wire rope to the bracket, use
only the supplied screw. Using another screw may
disable the function of the wire rope.
5
Attach the ceiling bracket (B) to a shelf, etc. on
which the camera is to be installed.
Use four screws (not supplied) appropriate for the
materials of the shelf, etc.
Align the f hole on the ceiling bracket (B) in the
direction where the front of the camera will be
Ceiling
positioned later.
bracket (A)
Wall
f hole
3M4 × 8 (supplied)
Fixing hole for wire rope
Ceiling bracket (A)
Screws (4)
Ceiling
bracket (B)
Hole for
connecting cables
Shelf, etc.
Installation
55