Connecting A Video Switcher - Sony HD 3CCD COLOR BRC-H700 Operating Instructions Manual

FUNCTION switch on the rear of the Optical
Multiplex Unit (page 25) and the DIP switch on the
bottom of the Remote Control Unit (page 23) are set
to RS-232C or RS-422 correctly.
Notes on use of the CCFC-M100HG HD Optical
Fiber Cable
• In order to prevent cable transmission loss, fix the
bend in the cable keeping more than 40 mm (1 5/8
inches) radius.
BRC-H700
BRU-H700
• To connect two Optical Fiber Cables, use the
extension plug supplied with the cable.
Extension plug
64
Connections
CCFC-
M100HG
Keep more than
40 mm (1 5/8
inches) radius.
CCFC-M100HG
B
A

Connecting a Video Switcher

Use a commercially available video switcher to switch
between the multiple camera signals to be output.
VISCA RS-
232C IN
RS-232C cable
VISCA RS-232C
OUT
VISCA RS-
232C IN
RS-232C cable
VISCA RS-232C
OUT
VISCA RS-
232C IN
RS-232C
cable
VISCA RS-232C
MODE RS-232C RS-422 TALLY/CONTACT
VISCA
1 9 1
RM-BR300 Remote
Control Unit
Video switcher (commercially available)
For connection with a video switcher, refer to the
Operating Instructions of the switcher.
Third to Seventh
BRC-H700
to AC outlet
RGB/
COMPONENT
Second BRC-
H700
to RGB/
COMPONENT
First BRC-
H700
!
CONTACT(TALLY) ON/OFF
TALLY
9
CONTACT DC IN 12V
TALLY/
CONTACT
to
CONTACT