Operating A Brc-H700 Camera From A Long Distance - Sony HD 3CCD COLOR BRC-H700 Operating Instructions Manual

Operating a BRC-H700 Camera from a Long Distance

This system allows you:
• To operate the camera remotely from a distance up to 1,000 m (3,281 feet)
• To perform pan/tilt and zoom operations comfortably using the joystick
• To transmit the video signal and control signal of the camera to a distant place using the Optical Fiber Cable
System configuration
BRC-H700
BRBK-H700 HD Optical Multiplex Card
Video signal
Remote control (VISCA) signal
,
Notes
• Be sure to turn on the power of the BRC-H700 camera before you turn on the power of the BRU-H700 HD Optical
Multiplex Unit.
• The BRC-H700 camera does not operate if nothing is connected to the BRBK-H700 HD Optical Multiplex Card
inserted into the camera. To operate the camera, connect the BRU-H700 Optical Multiplex Unit to the BRBK-H700
using the CCFC-M100HG Optical Fiber Cable and turn on the power of the BRU-H700.
• When the BRBK-H700 HD Optical Multiplex Card is inserted into the BRC-H700 camera, the EXT SYNC IN
connector, VISCA RS-232C IN/OUT connectors and VISCA RS-422 connector on the rear of the camera and the
BOTTOM switches on the bottom of the camera are disabled. Use the connectors and switches on the rear of the
BRU-H700 Optical Multiplex Unit instead.
• The optional CCFC-M100 Optical Fiber Cable cannot be used with this system.
12
System Configuration
CCFC-M100HG Optical Fiber Cable
Signal flow
HD video monitor, VTR, etc.
BRU-H700
Optical Multiplex
Unit
RM-BR300 Remote Control Unit