10
Connect the cables to the connectors on the rear of
the camera.
Ceiling
Note
Take the proper steps to ensure that the load of the
cables connected does not cause problems.
11
Attach the cable cover.
For attachment, see page 50.
The SONY and/or HD nameplates can be turned
upside down, if necessary,
To remove the camera
1
Remove the three screws used to attach the camera
in step 9 of "Installation."
2
Turn the camera with the bracket counterclockwise
to remove.
54
Connections
Connections
Connecting to an AC Outlet
Use the supplied AC power adaptor and AC power cord
to connect the camera to an AC outlet.
DC IN 12V
AC power adaptor MPA-AC1
(supplied)
to AC outlet
AC power cord (supplied)