Sony HD 3CCD Operating Instructions Manual page 63

To connect multiple cameras to the SD
sync signal generator
You can connect up to seven cameras.
EXT
VIDEO
SYNC IN
to video input
EXT SYNC IN
EXT SYNC IN
SD sync signal generator
Note
Signal processing in the interface board causes all output
signals from the HFBK-SD1 to be delayed by
approximately 93H (horizontal sync time) compared
with the YPbPr/RGB output signals from the camera.
Third to Seventh (last)
BRC-H700
75-ohm termination
switch: ON
to AC outlet
Video monitor, etc.
Second BRC-H700
75-ohm termination
switch: OFF
to AC outlet
First BRC-H700
75-ohm termination
switch: OFF
to AC outlet
75-ohm coaxial cable
to SYNC OUT
If you want to synchronize the phase between signals
output from the HFBK-SD1 and those from an SD sync
signal generator, set SYNC MASTER to SD1 in the
SYSTEM menu (page 35).
63
Connections