Table of Contents
Advertisement
IP Speaker for SIP Endpoint Paging
The Viking model 40-IP Ceiling/Wall Speaker enables SIP endpoint paging and also allows for
standard paging and background music via multicast. The speaker easily connects with a single
CAT5/6 cable from your PoE switch. Its shallow depth allows the speaker to be conveniently mounted
in a standard 2" x 4" stud wall or ceiling.
Line-level audio output connections are provided for connecting to an external amplifier. Speaker
output connections are also provided to directly drive additional analog speakers. The LED on the
40-IP can be programmed to light during paging. For more info, see DOD 503.
SIP / Multicast Paging Adapter
The Viking model PA-IP SIP / Multicast Paging Adapter provides an interface between new
VoIP phone systems (hardware or hosted/cloud based) and analog paging systems,
eliminating the need for an ATA or FXS port. The PA-IP can be used for standard SIP
endpoint paging or multicast paging and background music.
The unit easily connects with a single CAT5/6 cable from your PoE switch. The night bell
feature is programmable for time of day and day of week to enable loud ringing for after hour
incoming calls. Alternatively the night bell feature can be enabled by a contact closure across
the trigger input terminals. Line-level audio output connections are provided for connecting
to an external amplifier.
A built-in 6 Watt class D amplifier with speaker output connections are also provided to drive up to 6 analog speakers. A programmable relay
output is provided for triggering external amplifiers, etc. For more info, see DOD 505.
Analog Speakers and Paging Horns
The 25AE, 30AE, 35AE, and 40AE paging
speakers provide additional economical paging
coverage to existing Viking paging units (40-IP,
PA-2A, PA-15, PA-30, PA-60, HF-3W, M2W)
or to any system with an 8 Ohm output.
In
outdoor,
factory
environments, 25AE paging horns are the best
method of producing understandable sound. In
these environments the directional design
allows the installer to focus the sound cone
down aisles and toward work areas.
In office and restaurant environments, it is best
to distribute sound more evenly. Ceiling
mounted 30AE, 35AE, or 40AE speakers in
close proximity offer the best distribution and
are cost effective. The 35AE speakers include
a volume control.
30AE and 35AE Ceiling Speakers
• White metal grill
• Flush mount in office ceilings
• Mounting hardware included
• Excellent frequency response
• The 35AE includes a volume control
Tile Bridge for Ceiling Speakers
The SA-TBA is a tile bridge designed to mount 8 inch loud speaker and
bridges both 2 ft x 2 ft and 2 ft x 4 ft ceiling tiles. It is compatible with the
Viking models SA-1S, 30AE, 35AE, and 40AE speakers. The SA-TBA tile
bridge is constructed of 24 gauge cold rolled steel with an electro
galvanized rust-resistant finish.
Related Products
or
warehouse
40AE Ceiling Speakers
• Attractive with a modern look
• Flush mounts into a 9.5" to
10" diameter hole
• Integral mounting system
• Excellent sound quality
30AE
35AE
25AE Paging Horn
• Adjustable base for
easy mounting and
directional adjustment
• Compact design for
discreet mounting
23
40-IP
PA-IP
25AE
40AE
300AE Paging Horn
• 30 Watt 8 Ohm / 70V
Paging Horn
SA-TBA
300AE
Advertisement
Table of Contents
