Advertisement
Quick Links
Download this manual
See also:
Product Manual
Designed, Manufactured and Supported in the USA
VIKING
S E C U R I T Y & C O M M U N I C A T I O N S O L U T I O N S
IP Ceiling Speaker for SIP Endpoint Paging or Multicast
Paging/Background Music,
The Viking model 40TB-IP Talk-Back Ceiling/Wall Speaker enables
two-way conversations via SIP and also allows for standard paging
and background music via multicast. The Talk-Back Speaker easily
connects with a single CAT5/6 cable from your PoE switch. Its
shallow depth allows the speaker to be conveniently mounted in a
standard 2" x 4" stud wall or ceiling.
An auxiliary switch input allows a hard wired wall button to initiate a
SIP call. Alternately, an optional wireless Bluetooth remote call button
can be used (Viking model BTR-3, sold separately). A momentary
button press will initiate a standard call, and holding the button for 3
or more seconds will initiate an emergency call. The remote can also
be used to adjust the speaker volume. The LED on the 40TB-IP can
be programmed to blink when there is call activity.
The integrated microphone enables talk-back and also monitors room
noise to automatically increase speaker volume when necessary.
Line-level audio output connections are provided for connecting to
an external amplifier. Speaker output connections are also provided
to directly drive additional analog speakers.
• PoE powered (class 2, <6.5 watts)
• Use with an optional BTR-3 Bluetooth wireless remote to activate calls or
adjust speaker volume (see DOD 504)
• Paging prioritization
• Plays audio from multicast
• SIP endpoint or multicast group member
• Supports up to 10 multicast paging groups
• Add an optional SL-2 blue, green, red or amber strobe light (see DOD 242)
• Blue call status LED indicator
• SIP compliant (see pageg 2 for list of compatible IP-PBX phone systems)
• Automatic Noise Canceling (ANC) feature for operation in noisy environments
• Viking's proprietary VOX switching eliminates the need for "Push to Talk" mode
• Selectable auto-answer feature for monitoring
• Autoprovisioning via Viking programming software
Applications
• Amplified SIP endpoint or multicast IP paging for: schools, hospitals,
retail stores, office spaces, etc.
• Provide background music and sound masking
• Make standard and/or emergency SIP phone calls via hands free
talkback speaker
• Background music and emergency calls for elevator applications
Information: 715-386-8861
www.VikingElectronics.com
PRODUCT MANUAL
Making Standard
and
A programmable relay output is provided for activating door locks,
strobe lights, external amplifiers, etc.
Features
• Built-in high efficiency 4 watt class D amplifier
• Relay for activating door locks, strobe lights, external amplifiers, etc.
• SIP/Multicast: SIP page, SIP page and zoned multicast stream, zoned
• Support for access code to prevent unwanted SIP calls
• Line-level audio output for connecting to an external amplifier
• Hangs up on: busy signal, time-out, or touch tone command
• Network and Bluetooth remote speaker volume control
• Can drive additional external analog speakers for greater coverage
• Mounting: Blind mounts into 9.5" hole, clearance requirement of 3.45"
• Heavy duty back box protects speaker and circuitry against plenum dust
• Automatic Gain Control (AGC) to automatically increase ring volume to
Power: PoE class 2 (<6.5 watts)
Dimensions: Overall: 11" x 11" x 4" (279mm x 279mm x 102mm)
Shipping Weight: 5.0 lbs (2.27 kg)
Operating Temperature: -40°F to 140°F (-40° C to 60° C)
Humidity - Standard Products: 5% to 95% non-condensing
Audio Codecs: G711u, G722 and G711a (SIP only)
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with
auto cross over
Connections: (1) RJ45 10/100 Base-T, (1) 8 position terminal block
Sensitivity: 96dB / 1W / 1M S.P. Level
Emergency SIP Calls
or
(front view)
Installation requires a Network Administrator / IT Technician
!
multicast receive
(87.3mm) above 1/2" gypsum board ceiling
compensate for ambient noise
Specifications
Back box: 9.25" x 9.25" x 3.45" (235mm x 235mm x 88mm)
40TB-IP
SIP / Multicast Talkback
Ceiling Speaker
April 3, 2017
Model BTR-3 Wireless
Bluetooth Remote
(sold separately,
see DOD 504 for info)
Model
40TB-IP
(side view)
Advertisement
Related Manuals for Viking 40TB-IP
Summary of Contents for Viking 40TB-IP
- Page 1 40TB-IP (front view) (side view) be used to adjust the speaker volume. The LED on the 40TB-IP can be programmed to blink when there is call activity. The integrated microphone enables talk-back and also monitors room A programmable relay output is provided for activating door locks, noise to automatically increase speaker volume when necessary.
- Page 2 Viking VoIP SIP System Compatibility List NOTE: Exclusion from this list means only that compatibility has not been verified, it does not mean incompatibility. For detailed configuration instructions for certain vendors below, see Configuring Viking VoIP Phone and SIP Servers, DOD# 944.
- Page 3 It resides in the device’s memory and is used by routers to send network traffic to the correct IP address. You can find the MAC address of your 40TB-IP phone printed on a white label on the top surface of the PoE LAN port.
- Page 4 RJ45 plug and CAT5 or greater twisted pair wire. Remove jumper wire when adding Speakers Green Unit Status LED Optional Viking Model PA-60 paging Yellow Network Status LED: Lights steady to amplifier See DOD# 493 indicate power and data link. Blinks to indicate VIKING network activity.
- Page 5 A. Ceiling or Wall Installation The 40TB-IP Ceiling Speaker is intended to be mounted in a T-bar acoustic tile, gypsum ceiling or wall. An optional T-Bar support bracket (SA-TBA) is available that can transfer the speaker weight onto the T-bar rails. Installation instructions are provided with the support bracket.
- Page 6 Viking model RC-4A remote relay controller can be used. The relay controller is mounted securely inside the building and connected to the same LAN as the 40TB-IP. The on board door strike relays would not be used in this case as the 4OTB-IP will send an encrypted message to the RC-4A to activate its relays which control the door strikes/gates.
- Page 7 PC running Windows 2000, XP, Vista, Windows 7, Windows 8 or Windows 10 (see System Requirements above). The PC must be connected to the same LAN as the 40TB-IP. Install the application on your PC by placing the DVD into your PC’s drive.
- Page 8 Open the “Viking IP Programming” software on the PC and the start screen shown below will appear. Any Viking IP phones that are connected to the network will appear on the list. Simply select the 40TB-IP on the list and click on the “Connect”...
- Page 9 Step 1. programmed. The window in the upper left corner of the menu will show you each 40TB-IP phone that is connected to that LAN. Select the unit with Step 2. the same MAC address shown on the label located on the top of the Ethernet connector on the 40TB-IP phone.
- Page 10 Programming Features Index DESCRIPTION Section Page Connect/Disconnect Phone Numbers and Emergency Phone Numbers Security code (factory set to 845464) Access Code (1-6 digits, blank = disabled, factory set to 123456) Call Priority over Paging Groups Paging Sources Internal / External Relay (factory set to Internal) Relay Mode (Door Strike, Outbound Call, In/Outbound Call, Doorbell, Alarm Mode, factory set to Door Strike) Relay Command (1 or 2 digits, factory set to QQ and Q2) (Relay Mode must be set to Door Strike) Relay Time (0.5 - 99 sec, factory set to 5 sec)
- Page 11 The multicast paging groups can also be used for up to ten different paging zones for receiving audio streams. A paging zone can consist of one or many 40TB-IP multicast speakers. There is no limit to how many speakers can be in a given paging zone.
-
Page 12: Speaker Mode
6. Relay Internal / External With the relay set to “Internal” the 40TB-IP will activate its on board relay for door strike / gate control. The Relay should be set to “External” for higher security installations when using a Viking remote model RC-4A relay controller to activate the door strike / gate controller (see page 6). - Page 13 This feature selects the maximum length of time that calls can be connected. Programmable in increments of 1 minute up to a maximum of 9 minutes or disabled. With the call length disabled, the 40TB-IP phone must rely on a call ended signal, busy signal, silence, Ring No Answer limit, or return to dial tone to hang-up.
- Page 14 21. Dial Next Number on RNA (Ring No Answer) If enabled and a ring-no-answer is detected, the speaker phone will dial the next programmed phone number or emergency phone number. A momentary press of the call button will dial the first programmed phone number. Pressing and holding the call button for 3 or more seconds will dial the first Emergency Phone number.
- Page 15 23. LED Mode The “Call” LED on the 40TB-IP can be programmed to one of four different modes: OFF, ON, Phone or paging or Outbound phone. OFF Mode: Useful for silent monitoring applications. In this mode the LED will not light during normal operation. It will only light (blink) if it cannot register with the programmed SIP server or while manually resetting all network parameters to factory default.
- Page 16 32. Repeat Announcement Option The 40TB-IP Speaker phone can be programmed to play the announcement from 1-9 times. The call connected LED will turn on automatically after the announcement has stopped repeating. * Note: The factory default for the 40TB-IP Speaker phone is to play the voice announcement one time.
- Page 18 You may silence the error beeps, per instance, by pressing and holding the CALL button for 5 seconds or by clicking the “Mute Alarm Until Next Failure” button in the Viking VoIP Programming Software (see section on page ?). The error beeps...
- Page 19 Related Products Viking Analog Speakers The 25AE, 30AE, 35AE, and 40AE paging speakers provide additional economical paging coverage to existing Viking paging units (40-IP, PA-2A, PA-15, PA-30, PA-60, HF-3W, M2W) or to any system with an 8 ohm output. In outdoor, factory or warehouse environments, 25AE paging horns are the best method of producing understandable sound.
- Page 20 The same can be done with the Viking model MTG-10 in which one zone can have just paging, and the other zone can have paging plus the 10 different siren, warble, and chime tones that the MTG-10 can provide.
- Page 21 TWO YEAR LIMITED WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016.