Searching Manually (Edit Search); Reviewing The Most Recently Recorded Scenes (Rec Review); Searching Quickly For A Desired Scene (Zero Set Memory); Playback - Sony Handycam DCR-HC62E Operating Manual

Searching for the starting point (Continued)
Searching manually
(EDIT SEARCH)
You can search for the start point to start
the next recording while viewing the
pictures on the screen. The sound is not
played back during the search.
Make sure that the CAMERA-TAPE
lamp lights up (p. 20).
1
Touch
60min
2
Touch and hold
backward)/
and release it at the point where
you want the recording to start.
Reviewing the most recently
recorded scenes (Rec review)
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
Make sure that the CAMERA-TAPE
lamp lights up (p. 20).
Touch t
60min
28
.
STBY 0:00:00
EDIT
(to go
(to go forward)
.
STBY 0:00:00
EDIT
The last 2 seconds (approx.) of the most
recently recorded scene are played back.
Then, your camcorder is set to standby.
Searching quickly for a desired
scene (Zero set memory)
Make sure that the PLAY/EDIT lamp
lights up (p. 24).
1
During playback, press ZERO
SET MEMORY on the Remote
Commander at a point you want
to locate later on.
The tape counter is reset to "0:00:00"
and appears on the screen.
60min
If the tape counter is not displayed,
press DISPLAY.
2
Press STOP when you want to
stop playback.
mREW
PLAY
STOP
DISPLAY
ZERO SET MEMORY
0:00:00
GUIDE
P-MENU