Searching For The Starting Point; Searching For The Last Scene Of The Most Recent Recording (End Search) - Sony Handycam DCR-HC62E Operating Manual

Unavailable settings during Easy
Handycam
During Easy Handycam operation, some
items are unavailable. If an attempted
setting is not available, but still desired,
touch [SET] to display an on-screen
instruction. Follow the instruction to cancel
Easy Handycam operation and then select
the setting.
z Tips
• If [SET] is not displayed in step 3, follow the
instruction on the screen.
Searching for the
starting point
Searching for the last scene of
the most recent recording (END
SEARCH)
[END SEARCH] will not work once you
eject the cassette after you have recorded on
the tape.
Make sure that the CAMERA-TAPE
lamp lights up (p. 20).
t
Touch
60min
END SEARCH
EXECUTING
Touch here to cancel the operation.
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
b Notes
• [END SEARCH] will not work correctly when
there is a blank section between recorded
sections on the tape.
z Tips
• You can also select [END SEARCH] from the
menu. When the PLAY/EDIT lamp lights up,
select the [END SEARCH] short-cut in Personal
Menu (p. 32).
.
1 0:00:00
CANCEL
Continued ,
27