Otherwise, fire or injury may result. For customers in the U.S.A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800- 222-SONY (7669). The number below is for the FCC related matters only. Regulatory Information...
Page 3
Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. FOR CUSTOMERS IN EUROPE ATTENTION The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.
Notice for the customers in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108- 0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
Page 5
LCD panel • The camcorder is not dustproof, dripproof or waterproof. See “On use and care” (p. 81). • When connecting your camcorder to another device with communication cables, be sure to insert the connector plug in the correct way.
Page 6
About the Carl Zeiss lens • Your camcorder is equipped with a Carl Zeiss lens, which was developed jointly by Carl Zeiss, in Germany, and Sony Corporation, and produces superior images. It adopts the MTF measurement system for video cameras and offers a quality typical of a Carl Zeiss lens.
Playing the picture on a TV ...30 Using the Menu Using the menu items ... 32 Menu items ...33 CAMERA SET menu ...35 Settings to adjust your camcorder to the recording conditions MEMORY SET menu ...40 Settings for the “Memory Stick Duo” PICT.APPLI. menu ...42...
Page 8
Troubleshooting Troubleshooting ... 66 Warning indicators and messages ... 73 Additional Information Using your camcorder abroad ... 76 Maintenance and precautions ... 77 Usable cassette tapes ... 77 About the “Memory Stick” ... 78 About the “InfoLITHIUM” battery pack ... 79 About i.LINK ...
Getting Started Step 1: Checking supplied items Make sure that you have following items supplied with your camcorder. The number in the parentheses indicates the number of that item supplied. AC Adaptor (1) (p. 10) Power cord (Mains lead) (1) (p. 10) Wireless Remote Commander (1) (p.
Notes • You cannot attach any “InfoLITHIUM” battery pack other than the H series to your camcorder. Align the terminals of the battery pack and your camcorder 1, then attach the battery pack and click it into place 2.
Page 11
To use an outside power source You can operate your camcorder using the power from the wall outlet (wall socket) by making the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case.
Adaptor or battery terminal with any metallic objects. This may cause a malfunction. LCD panel • Even if your camcorder is turned off, AC power closed (house current) is still supplied to it while connected to the wall outlet (wall socket) via the AC Adaptor.
You can set the desired date and time by touching SET] (p. 32). b Notes • If you do not use your camcorder for about 3 months, the built-in rechargeable battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the rechargeable battery and then set the date and time again (p.
Step 3: Turning the power on and setting the date and time (Continued) Changing the language setting You can change the on-screen displays to show messages in a specified language. t [MENU] t Touch (TIME/LANGU.) t [LANGUAGE], then select the desired language.
After recording, set the LENS COVER switch to CLOSE, to close the lens cover. The LCD panel Open the LCD panel 90 degrees to the camcorder (1), then rotate it to the best angle to record or play (2). DISP/BATT INFO 180 degrees (max.)
Step 5: Inserting a tape or a “Memory Stick Duo” Cassette tape You can use mini DV (p. 77). Slide and hold the EJECT lever in the direction of the arrow and open the lid. OPEN/EJECT lever The cassette compartment automatically comes out and opens up.
Page 17
• When the access lamp is lit or flashing, your camcorder is reading/writing data. Do not shake or knock your camcorder, turn the power off, eject the “Memory Stick Duo,” or remove the battery pack. Otherwise, image data may be damaged.
Recording/Playback Easy Recording/Playback (Easy Handycam) With this Easy Handycam operation, most of the camera settings are automatically optimally adjusted, which frees you from detailed adjustments. The screen font size increases for easy viewing. Open the lens cover (p. 15). Movies Slide the POWER switch E to turn on the CAMERA-TAPE...
Page 19
Playing back movies/still images Slide the POWER switch E to turn on the PLAY/EDIT lamp. Touch the buttons on the screen B as follows. Movies Touch A GUIDE (p. 26) B Rewind/Fast forward C Stop D Play/Pause toggles x To cancel Easy Handycam operation Press EASY A again.
To stop recording, press REC START/STOP A (or B) again. b Notes • You cannot record movies onto a “Memory Stick Duo” using your camcorder. z Tips • While recording movies on a tape, or while in standby mode, you can record a still image on a “Memory Stick Duo”...
Recording still images Still images are recorded on the “Memory Stick Duo.” Slide the POWER switch in the direction of the arrow repeatedly to turn on the CAMERA-MEMORY lamp. If the POWER switch is set to OFF (CHG), slide it while pressing the green button.
• You cannot change the zoom speed with the zoom buttons below the LCD frame. • The minimum possible distance between camcorder and subject while maintaining sharp focus is about 1 cm (about 13/32 in.) for wide angle and about 80 cm (about 2 5/8 feet) for telephoto.
. (back light) again. Recording in mirror mode Open the LCD panel 90 degrees to the camcorder (1), then rotate it 180 degrees to the lens side (2). z Tips • A mirror-image of the subject appears on the LCD screen, but the image will be normal when recorded.
Slide the POWER switch in the direction of the arrow repeatedly to turn on the PLAY/EDIT lamp. If the POWER switch is set to OFF (CHG), slide it while pressing the green button. Playing movies Touch , then touch * Playback automatically stops if pause is engaged for more than 3 minutes. is displayed instead of a tape is not being played.
Viewing still images Touch The most recently recorded image is displayed. Switch the playback media* is displayed on the tape playback screen. To display pictures on a “Memory Stick Duo” on the index screen Touch . Touch one of the pictures to back to the single display mode. A Previous/Next 6 pictures B The picture displayed before switching to the index screen.
GUIDE) You can easily select the desired setting screens by using the guide functions (USAGE GUIDE). 60min STBY GUIDE Your camcorder has 3 guide functions as shown below. SHOOT Takes you to the setting GUIDE: screens related to recording. USEFUL...
CANCEL Touch here to cancel the operation. The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished. b Notes •...
(p. 24). 0:00:00 (to go 0:00:00 The last 2 seconds (approx.) of the most recently recorded scene are played back. Then, your camcorder is set to standby. mREW PLAY STOP DISPLAY ZERO SET MEMORY During playback, press ZERO...
Press mREW. The tape stops automatically when the tape counter reaches “0:00:00.” The tape counter returns to the time code display, and the zero set memory display disappears. Press PLAY. Playback starts from the point designated “0:00:00” on the tape counter.
Playing the picture on a TV You can connect your camcorder to the input jack of a TV or a VCR using the A/V connecting cable (1) or the A/V connecting cable with S VIDEO (2). Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p.
Page 31
(right channel) plug to the audio input jack of your TV or VCR. If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR) You need the 21-pin adaptor (optional) to connect your camcorder to a TV for viewing recorded images. This adaptor is designed for output use only. TV/VCR...
Using the Menu Using the menu items Slide the POWER switch in the direction of the arrow repeatedly to turn on the respective lamp. CAMERA-TAPE lamp: CAMERA-MEMORY lamp: Duo” PLAY/EDIT lamp: settings for viewing/editing Touch the LCD screen to select the menu item. Unavailable items will be grayed out.
Menu items CAMERA SET menu SCENE SELECT SPOT METER EXPOSURE WHITE BAL. AUTOSLW SHTR SPOT FOCUS FOCUS TELE MACRO SUPER NSPLUS NS LIGHT COLOR SLOW S SELF-TIMER DIGITAL ZOOM STEADYSHOT MEMORY SET menu STILL SET ALL ERASE FORMAT FILE NO. NEW FOLDER REC FOLDER PB FOLDER...
Page 34
Menu items (Continued) EDIT/PLAY menu VAR.SPD PB REC CTRL AUD DUB CTRL END SEARCH STANDARD SET menu REC MODE AUDIO MODE VOLUME AUDIO MIX LCD/VF SET TV TYPE USB CAMERA DISP GUIDE GUIDEFRAME DATA CODE REMAINING REMOTE CTRL BEEP DISP OUTPUT MENU ROTATE A.SHUT OFF CALIBRATION...
CAMERA SET menu Settings to adjust your camcorder to the recording conditions The default settings are marked with B. The indicators in parentheses appear when the items are selected. See page 32 for details on selecting menu items. SCENE SELECT...
Page 36
CAMERA SET menu (Continued) * Adjusted to focus on subjects farther away only. ** Adjusted not to focus on subjects a short distance away. b Notes • If you set [SCENE SELECT], [WHITE BAL.] setting is canceled. SPOT METER (Flexible spot meter) You can adjust and fix the exposure to the subject, so that it is recorded in suitable...
Page 37
[EXPOSURE] set (or vice versa), select [AUTO] and aim your camcorder at a nearby white object for about 10 seconds for better color balance adjustment. • When the white balance has been set with [ONE...
Page 38
• Adjust the focus manually ([FOCUS], p. 37) when it is hard to focus automatically. • The shutter speed of your camcorder changes depending on the brightness. The motion of the picture may slow down in this case. NS LIGHT (NightShot Light) When using either the NightShot plus (p.
Page 39
SELF-TIMER When you set [SELF-TIMER] to [ON] ), the self-timer starts recording in about 10 seconds after pressing PHOTO to record still images. To cancel the count down, touch [RESET]. To cancel [SELF-TIMER], touch [OFF]. z Tips • You can also set the self-timer with the PHOTO button of the Remote Commander (p.
MEMORY SET menu Settings for the “Memory Stick Duo” The default settings are marked with B. The indicators in parentheses appear when the items are selected. See page 32 for details on selecting menu items. STILL SET BURST You can record several still images one after another by pressing PHOTO.
Page 41
Top: [FINE] is selected for image quality. Bottom: [STANDARD] is selected for image quality. • When using the “Memory Stick Duo” made by Sony Corporation. The number of pictures you can record varies depending on the recording environment and the recording media.
Touch [YES] t b Notes • You cannot delete the created folders using your camcorder. You will have to format the “Memory Stick Duo” (p. 41), or delete them using your computer. • The number of recordable pictures on a “Memory Stick Duo”...
Page 43
OVERLAP (fade in only) WIPE (fade in only) DOT FADER (fade in only) SLIDE SHOW Plays back in sequence the images stored on a “Memory Stick Duo,” or in a folder (slide show). t [PB FOLDER]. 1 Touch 2 Select [ALL FILES ( )] or [CURRNT FOLDER ( , Current folder)], then touch...
Page 44
PICT.APPLI. menu (Continued) FLASH (flash motion) Records a movie with a serial-still-image effect (strobe effect). LUMI. KEY (luminance key) Replaces a brighter area in a still image memorized at the moment when [LUMI. KEY] was selected, with a movie. TRAIL When recording, trailing afterimages are left in the picture.
Page 45
• Do not turn off the power or disconnect the power source while a message is displayed on the screen. • The camcorder will shoot several frames for the first and last shots of the Smooth interval recording. • Smooth interval recording is released when approximately 12 hours have elapsed after shooting has begun.
CAMERA-TAPE. PictBridge PRINT See page 60. USB SELECT You can connect the camcorder to a personal computer with a USB cable and view pictures on the computer. You can also connect the camcorder to a PictBridge- compatible printer using this function.
Page 47
– When the tape has been recorded in the 16-bit mode (p. 48). – When the tape has been recorded in the LP mode. – When your camcorder is connected via an i.LINK cable. – When the tape has been recorded in 4CH MIC mode on other camcorders.
EDIT/PLAY menu (Continued) END SEARCH EXEC The most recently recorded picture is played back for about 5 seconds and then stops automatically. CANCEL Stops [END SEARCH]. b Notes • After ejecting the cassette, the END SEARCH function is not available. STANDARD SET menu Settings while recording on a tape or other...
Page 49
B NORMAL Standard brightness. BRIGHT Brightens the LCD screen. b Notes • When you connect your camcorder to outside power sources, [BRIGHT] is automatically selected for the setting. • When you select [BRIGHT], battery life is slightly reduced during recording.
REMOTE CTRL (Remote control) The default setting is [ON], allowing you to use the supplied Remote Commander (p. 91). z Tips • Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR 0:00:00:00 remote control unit. GUIDE...
Notes • When you connect your camcorder to a wall outlet (wall socket), [A.SHUT OFF] is automatically set to [NEVER]. CALIBRATION See page 83. TIME/LANGU. menu See page 32 for details on selecting menu items. CLOCK SET See page 13.
Customizing Personal Menu You can add desired menu items to any Personal Menu allocated to the lamp positions currently lit. This is convenient if you add frequently used menu items to Personal Menu. Adding a menu item You can add up to 28 menu items to each Personal Menu.
Page 53
Arranging the order of menu items displayed on Personal Menu t [P-MENU SET UP] Touch t [SORT]. If the desired menu item is not displayed, touch Touch the menu item you want to move. Touch to move the menu item to the desired place. Touch To sort more items, repeat steps 2 to 4.
Dubbing/Editing Dubbing to VCR or DVD/HDD recorders You can dub images played back on your camcorder to other recording devices, such as VCRs or DVD/HDD recorders. You can connect your camcorder to VCRs or DVD/HDD recorders, using the A/V connecting cable (1), the A/V connecting cable with S VIDEO (2), or the i.LINK cable (3).
Page 55
Notes • When you are connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting cable to the video input jack, and the red (right channel) or the white (left channel) plug to the audio input jack on the device.
(p. 10). Refer also to the instruction manuals supplied with the devices to be connected. b Notes • You cannot record pictures on your camcorder from a VCR, etc., that does not have an i.LINK jack. : Signal flow When connecting your camcorder to another device using an i.LINK cable, the...
Page 57
Press PHOTO lightly at the scene you want to record. Check the image and press it fully. b Notes • The indicator appears when you connect your camcorder and other devices via an i.LINK cable. (This indicator may also appear on the connected device.)
• The date and time the picture is recorded on the tape and stored on the “Memory Stick Duo” are recorded. On your camcorder, the date and time the picture is recorded on the tape are displayed. Camera setting data recorded on the tape cannot be stored on the “Memory Stick Duo.”...
• To cancel Print mark, touch the image again to cancel Print mark in step 3. (Print mark/Image • Do not mark images on your camcorder if the “Memory Stick Duo” already has some images with the Print mark put on using other devices.
Connect the AC Adaptor to obtain power from the wall outlet (wall socket) (p. 10). Insert the “Memory Stick Duo” containing still images into your camcorder and turn on the printer. Connecting your camcorder to the printer...
Page 61
– Operate the POWER switch. – Disconnect the power cord (mains lead). – Disconnect the USB cable from your camcorder or the printer. – Remove the “Memory Stick Duo” from your camcorder. • If the printer stops working, disconnect the USB cable, turn the printer off and on again and restart the operation from the beginning.
The “First Step Guide” is an instruction manual you can refer to on your computer. This describes basic operations, from initial hookup of your camcorder and computer and making settings, to general operation the first time you use the software “Picture Motion Browser”...
• When using a “Memory Stick PRO Duo” and your computer is not compatible with it, connect your camcorder with the USB cable instead of using the Memory Stick slot on the computer. Installing the “First Step Guide”...
Page 64
Installing the “First Step Guide” and software (Continued) Select the desired language and the model name of your camcorder from the pull-down menu. Click [FirstStepGuide(HTML)]. Installation starts. When [Save is complete] appears, click [OK] to finish the installation. To view the “First Step Guide” in PDF In step 6, click [FirstStepGuide(PDF)].
Tips • You can also start by selecting [Start] t [Programs] ([All Programs] for Windows XP) t [Sony Picture Utility] t [FirstStepGuide] t Your camcorder’s folder t “First Step Guide” in HTML. • To view “First Step Guide” in HTML without...
If you run into any problems using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. • Overall operations/Easy Handycam/ Remote Commander...66 • Batteries/Power sources ...67 •...
Page 67
• Attach the battery pack to the camcorder correctly (p. 10). If the problem persists, disconnect the AC Adaptor from the wall outlet (wall socket) and contact your Sony dealer. The battery pack may be worn-out. The remaining battery time indicator does not indicate the correct time.
Page 68
The Cassette Memory indicator or title display does not appear while using a cassette with Cassette Memory. • This camcorder does not support Cassette Memory, so the indicator does not appear. The remaining tape indicator is not displayed. • Set [ REMAINING] to [ON] to always display the remaining tape indicator (p.
Page 69
• The video head may be dirty. Use a cleaning cassette (optional) (p. 83). • Try again from the beginning. • Use a Sony mini DV cassette. The auto focus does not function. • Set [FOCUS] to [AUTO] (p. 37).
Page 70
Troubleshooting (Continued) The backlight function does not function. • In the following settings, the backlight function is canceled. – [MANUAL] of [EXPOSURE] – [SPOT METER] • The backlight function does not work during Easy Handycam operation (p. 19). A vertical band appears when recording candlelight or electric light in the dark.
Page 71
• The tape was recorded in a TV color system other than that of your camcorder (PAL). This is not a malfunction (p. 76). is displayed on the screen. • The tape you are playing was recorded on another device with a 4ch microphone (4CH MIC REC).
• Install the “Picture Motion Browser” (p. 63). • The computer may not recognize your camcorder for a few moments after you connect it. Wait for a while. • Disconnect USB devices other than the keyboard, the mouse, and the camcorder from the (USB) jack on the computer.
If indicators appear on the LCD screen or in the viewfinder, check the following. Some symptoms you can fix by yourself. If the problem persists even after you have tried a couple of times, contact your Sony dealer or local authorized Sony service facility. C:(or E:) ss:ss (Self-diagnosis...
Page 74
• The write-protect tab on the “Memory Stick Duo” is set to lock (p. 78). (Warning indicator pertaining to camera-shake warning) • The camcorder is unsteady, so camera- shake easily occurs. Hold the camcorder steady with both hands and shoot the image. However, note that the camera-shake warning indicator does not disappear.
Page 75
Check the connected device. • Switch off the printer and switch it on again, then disconnect the USB cable and reconnect it. Cannot print. Check the printer. • Switch off the printer and switch it on again, then disconnect the USB cable and reconnect it.
Additional Information Using your camcorder abroad Power supply You can use your camcorder in any country/region using the AC Adaptor supplied with your camcorder within the AC 100 V to 240 V, 50/60 Hz range. On TV color systems Your camcorder is PAL system, so its...
Maintenance and precautions Usable cassette tapes You can use mini DV format cassettes only. Use a cassette with the Your camcorder is not compatible with the Cassette Memory function. To prevent a blank section from being created on the tape Go to the end of the recorded section using END SEARCH (p.
– If you eject the “Memory Stick Duo,” turn the power off on your camcorder, or remove the battery pack for replacement while your camcorder is reading or writing image files on the “Memory Stick Duo”...
“Design rule for Camera File system” universal standard established by the JEITA (Japan Electronics and Information Technology Industries Association). • On your camcorder, you cannot play back still images recorded on other devices (DCR- TRV900E or DSC-D700/D770) that do not conform to the universal standard. (These models are not sold in some regions.)
DV Interfaces, refer to the operating instructions of the device to be connected. z Tips • i.LINK is a more familiar term for the IEEE 1394 data transport bus proposed by Sony, and is a trademark approved by many corporations.
DV Interface, see page 54, 56. This unit can also be connected to other i.LINK (DV Interface) compatible devices made by Sony (e.g. a VAIO series personal computer) as well as to video devices. Some i.LINK compatible video devices, such as Digital Televisions, DVD, MICROMV or HDV recorders/players are not compatible with DV devices.
Page 82
If the battery is accidentally swallowed, consult a doctor immediately. • If the battery electrolytic liquid has leaked, – consult your local authorized Sony service facility. – wash off any liquid that may have contacted your skin.
Page 83
• If the video heads are dirty, video or sound distortion may be apparent. • If the following problem occurs, clean the video heads for 10 seconds with the Sony DVM- 12CLD cleaning cassette (optional). – Mosaic-pattern noise appears on the playback picture or the screen is displayed in blue.
Page 84
• To prevent mold, periodically clean the lens as described above. It is recommended that you operate your camcorder about once a month to keep it in optimum state for a long time. To remove dust from inside the viewfinder 1 Pull out the viewfinder.
Remote Commander may shorten, or the Remote Commander may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
Page 86
* “Exif” is a file format for still images, established by the JEITA (Japan Electronics and Information Technology Industries Association). Files in this format can have additional information such as your camcorder’s setting information at the time of recording. Input/Output connectors A/V Remote Connector 10-pin connector Video signal: 1 Vp-p, 75 Ω...
Page 87
PRO Duo,” “ “Memory Stick PRO-HG Duo,” “ ,” “Memory Stick Micro,” “MagicGate,” “ “MagicGate Memory Stick” and “MagicGate Memory Stick Duo” are trademarks of Sony Corporation. • “InfoLITHIUM” is a trademark of Sony Corporation. • i.LINK and are trademarks of Sony Corporation.
F Grip belt (15) G Lens (Carl Zeiss Lens) (6) H LENS COVER switch (15) I Remote sensor Point the Remote Commander (91) towards the remote sensor to operate your camcorder. J Internal stereo microphone (47) K Infrared port (22)
Page 89
A DISP/BATT INFO button (11, 15) B EASY button (18) C RESET button Initializes all the settings, including the setting of the date and time. D LCD screen/touch panel (15, 92) E REC START/STOP button (18, 20) F Zoom buttons (22, 26) G WIDE SELECT button (23) H Speaker Playback sound comes out from the...
Page 90
Identifying parts and controls (Continued) A POWER switch (13) B Viewfinder (15) C Eyecup (84) D Viewfinder lens adjustment lever (15) E DV interface (54, 56) F DC IN jack (10) G CAMERA-TAPE, CAMERA- MEMORY, PLAY/EDIT lamp (13) H REC START/STOP button (18, 20) I A/V Remote Connector (30, 54) J Tripod receptacle Attach the tripod (optional: the length of the...
Notes • Remove the insulation sheet before using the Remote Commander. • Aim the Remote Commander towards the remote sensor to operate your camcorder (p. 88). • To change the battery, see page 85. A PHOTO button* (18, 21) The on-screen image when you press this button will be recorded onto the “Memory...
Indicators displayed during recording/playback Recording movies Recording still images 60min FINE 1.0M GUIDE qd 7 Viewing movies Viewing still images qh q; 1.0M wf wg A Remaining battery (approx.) B Recording mode (SP or LP) (48) C Recording status ([STBY] (standby) or D Recording: Tape counter (hour: GUIDE E Recording capacity of the tape (approx.)
Page 93
V Previous/Next image button (25) W Index screen display button (25) X Image protection mark (59) Y Print mark (59) Indicators when you made changes You can use the [DISP GUIDE] (p. 94) to check the function of each indicator that appears on the LCD screen.
Page 94
Indicators displayed during recording/playback (Continued) Data code during recording The date/time during recording and the camera setting data will be recorded automatically. They do not appear on the screen during recording, but you can check them as [DATA CODE] during playback (p.
Page 96
Index (Continued) MOSAIC ...44 MOSAIC FADER ...42 Movie...18, 19, 20, 24 NEG.ART...44 NEW FOLDER ...42 NORMAL...40 NS LIGHT (NightShot Light) ...38 NTSC...76 Number of recordable pictures ...40 OLD MOVIE...44 ONE PUSH...36 OUTDOOR ...36 OVERLAP...43 P.MENU ...See Personal Menu PAL ...71, 76 PASTEL ...44 PB FOLDER (Playback folder) ...42...
Page 97
Write-protect tab ...77 Zero set memory ...28 Zoom...22...
Page 100
Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. http://www.sony.net/ Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)- free vegetable oil based ink. Printed in Japan...