Nozzle Pressure Gauge; Chemlocker (Optional); Safetylocker - Hardi NAVIGATOR 4000 Instruction Book

Nozzle Pressure Gauge

The remote pressure gauge is integrated at the top of the platform. This
gauge measures the working pressure in the boom tubes as close to the
nozzles as possible.
The outputs stated in the nozzle charts are always based on the pressure
measured at the nozzle. Both when calibrating and spraying, the
pressure must be adjusted according to the readings of this pressure
gauge.

ChemLocker (optional)

A ChemLocker for storage of chemical containers etc. is mounted on the
sprayers right side.
If the optional FoamMarker is selected, the FoamMarker tank is then
placed inside the ChemLocker.
μ
ATTENTION! Maximum load is 100 kg or 100 litres.

SafetyLocker

The locker is integrated in the front left side, just above the SmartValves.
It is for the purpose of storing non-contaminated protective gear, soap
for hand washing etc.
The locker is split in two compartments for the separation of clean
clothes from gloves with risk of contamination.
±
WARNING! Although this locker is meant for storing nontoxic
items, it must never be used for storing food, beverage or other
things meant for consumption.
3 - Description
33