Maintenance; Lubrication; General Info; Recommended Lubricants - Hardi NAVIGATOR 4000 Instruction Book

Lubrication

General Info

Always store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination from dirt and
condensed water. Keep oil filling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughly before
lubricating. Avoid skin contact with oil products for longer periods.
Always follow the quantity recommendations. If no quantity is recommended, feed the lubricator until new grease becomes
visible.
Pictograms in lubrication & oiling plans designate the following:
1. Lubricant to be used (see "Recommended lubricants").
2. Recommended intervals (hours).
μ
ATTENTION! If the sprayer is cleaned with a high pressure washer,
lubrication of the entire machine is recommended.

Recommended lubricants

BALL BEARINGS:
Universal Lithium grease,
NLGI No. 2
SHELL RETINAX EP2
CASTROL LMX GREASE

Boom and Centre lubrication

μ
ATTENTION! Please refer to Boom Manual for Boom and Centre lubrication
Trailer/ParaLift Lubrication & Oiling Plan
SLIDE BEARINGS:
Lithium grease with
Molybdenumdisulphide or
graphite
SHELL RETINAX HD 2
(or HDX 2)

6 - Maintenance

OIL LUBRICATION POINTS:
TOTAL Transmission TM
SAE 80W/90
Castrol EPX 80W/90
SHELL Spirax 80W/90
Mobil Mobilube 80W/90
3
2
4
1
1
77