Chamberlain EL Series Programming Manual page 8

QUICK REFERENCE GUIDE
Programming
Page Description of Task
Number
41
Add or Edit a Full
81
Function Card
82 41
Add a Group of Cards
at Once
87 42
Activate or Deactivate
a Card
88 42
Delete a Card
102 49
Configure "Door Held
Open" Alarm Feature
103 50
Configure "Door
Forced Open" Alarm
Feature
104 50
Configure "Strikes and
Out" Alarm Feature
49
Enable or Disable Anti-
105
Passback Forgiveness
at Midnight
106 54
Enable or Disable Echo
Cancellation by
Channel
109 53
Override Telephone
Company Answering
Service
110 54
Set a Phone Number's
Extension Delay Time
111 20
Verify Unit Number
113 53
Dial "0-9" First to Get
an Outside Line Using
a Automated Phone
System
115 52
Set Alternative Prefixes
116 56
Change the Visitor Call
Response Keys
118 55
Configure Maximum
Modem Speed
120 63
Talk through the Unit
Speaker
121 64 Cycle Door
Factory
Setting
81 # (card PIN code) # (facility code) (card type, 26 or
30) # (schedule for door 1, 0-63) # (schedule for door 2,
0-63) # (schedule for door 3, 0-63) # (schedule for door
4, 0-63) #
82 # (card PIN code start range) # (card PIN code end
range) # (facility code) # (card type, 26 or 30) #
(0=deactivate, 1=activate) # (schedule for door 1, 0-63)
# (schedule for door 2, 0-63) # (schedule for door 3,
0-63) # (schedule for door 4, 0-63) # name (0-20
characters) #
87 # (card PIN code) # (facility code) # (card type, 6 or
30) # (0=deactivate; 1=activate) # (0=don't use start;
1=use start) # (Start Date=yymmdd) # (Start Time=hhmm)
# (0=don't use end; 1=use end) # (End Date=yymmdd) #
(End Time=hhmm) #
88 # (card PIN code) # (facility code) # (card type, 26 or
30) #
Disabled 102 # (alarm option; 0=disable, 1=enable until relay time
expires, 2=enable until alarm clears) # (relay group, 0000-
1111) # Order of relays is 4321
Disabled 103 # (alarm option; 0=disable, 1=enable until relay time
expires, 2=enable until alarm clears) # (relay group, 0000-
1111) # Order of relays is 4321
Disabled 104 # (alarm option; 0=disable, 1=enable until relay time
expires, 2=enable until alarm clears) # (relay group, 0000-
1111) # Order of relays is 4321
Enabled 105 # (0=disable; 1=enable) #
Enabled 106 # (1=Mic/Spkr; 2=Resident; 3=Telco #; 0=disable;
1=enable)
Disabled 109 # (0=no; 1=yes) # Default is "No"
No Delays 110 # (directory code) # (phone extension delay) # (call
forward extension delay) #
111 #
Disabled 113 # (0=disable; 1=enable) # (0-9, when enabled) #
Normal 115 # (normal-00, mixed-01, asterisk-02, pound-03,
number-1n) # each unit in chain must have same setting
9, 5, 3, 7, 116 # (activate door 1) # (activate door 2) # (activate
2, 1,* door 3) # (activate door 4) # (call wait toggle) # (extend
talk time) # (hang up and deny access) #
14400 118 # Speed (14400, 9600, 2400, 1200) #
120 #
121 # (door 1-4) #
7
Programming
Procedure