Chamberlain EL Series Programming Manual page 66

Direct Commands from Your Phone (continued):
Get Door Status:
1 Press
The unit is now prepared to accept a direct command.
Enter the Unit ID code (if applicable).
2
ABC
Press
3
Select the Door (1-4) that you want to control. Press
4
NOTE: If no door is selected then Door 1 is used.
Release Door:
Press
1
The unit is now prepared to accept a direct command.
Enter the Unit ID code (if applicable).
2
ABC
Press
3
4 Select the Door (1-4) that you want to control. Press
NOTE: If no door is selected then Door 1 is used.
Enable/Disable Call Forwarding For Residence:
1 Press
The unit is now prepared to accept a direct command.
2 Enter the Unit ID code (if applicable).
1
Press
3
Enable/Disable Do Not Disturb For Residence:
1 Press
The unit is now prepared to accept a direct command.
Enter the Unit ID code (if applicable).
2
1
Press
3
NOTE: For Steps 125 and 126 a valid time zone must be in place in order for their commands
to function.
from the residence phone.
DEF
then
from the residence phone.
GHI
then
from the residence phone.
JKL
ABC
2 5
then enable
from the residence phone.
MNO
ABC
2 6
then enable
123 124 125 126
Hear the status for a specified door. The status
is open when the door is currently latched
open or in the unlock portion of an automatic
time zone. The status is closed for all other
times.
Cancels command set by Step 122 and returns
to previous schedule (if applicable).
NOTE: A Call Forwarding phone number and
time zone must be in place in order for this to
function.
or disable
or disable
65
then
then