Chamberlain EL Series Programming Manual page 47

ASSIGNING DOOR USE AND UNLOCK TIME ZONE
Unlock Time Zones allow you to automatically unlock and lock doors/gates at times you specify.
Assign "Door Use Time Zone" :
Door Use Time Zone allows you to set up time periods and days during which access is restricted for all entry
codes, cards and remote controls. For example, to prohibit residents from entering the building through Door 2
on Sundays, create a time zone that excludes Sunday and assign it to Door 2.
Factory Setting: Enabled
1 Press
2 Enter Door Number (1 to 4). Then (#)
Enter Time Zone Number (0 to 63). Then (#)
3
0=Full Restrictions 1=Full Access
EXAMPLE:
Enable or Disable Unlock Schedule:
Enable or disable auto unlock/lock schedule as necessary.
Factory Setting: Enabled
Press
1
Enable (1) or Disable (0). Then (#)
2
Assign Door Auto Lock / Unlock Schedule:
Assign an auto unlock/lock schedule to a door. During the schedule, the door will be unlocked. For example, if
the main door has a schedule from 8am to 5pm, the door will unlock at 8am and lock at 5pm.
Factory Setting: Disabled
1 Press
2 Enter Door Number (1 to 4). Then (#)
3 Enter Schedule Number (2 to 63; or 99). Then (#)
EXAMPLE:
63
Then
1
Assigns door "2" to use time zone "3".
Then
EXAMPLE:
1
Auto unlock/lock schedule is disabled.
Then
1
Assigns door "1" to unlock schedule "2".
2 3
11
2
31
NOTE: Use a schedule number of "99" to disable
auto/unlock schedule for a particular door.
2 3
46