Delete Admin And User; Faq; How To Reset U-Bolt Pro?; How To Control U-Bolt Pro Remotely? - U-tec Ultraloq U-Bolt Pro Installation And User Manual

4.4 Delete Admin and User

Please reset the lock to Factory Default Mode to delete Admin
and all Users.
How to reset the lock in Standalone Mode?
Please use a Reset Needle to push the Reset Button (at the
bottom of Interior Assembly) for around 3 seconds until you
hear one long beep and two short beeps.

FAQ

1. How to reset U-Bolt Pro?

Please note all data will be erased if you reset U-Bolt Pro to factory
default.
If you are using U-tec App as Owner, please click "Delete and
Reset" to remove the lock from your U-tec Account, then use a
Reset Needle to push the Reset Button (at the bottom of Interior
Assembly) for around 3 seconds until you hear one long beep and
two short beeps.
If U-Bolt Pro is working as Standalone Mode, please use a Reset
Needle to push the Reset Button (at the bottom of Interior
Assembly) for around 3 seconds until you hear one long beep and
two short beeps.

2. How to control U-Bolt Pro remotely?

U-Bolt Pro is a Bluetooth enabled smart lock. You can pair the
optional Ultraloq Bridge WiFi adaptor with U-Bolt Pro to control it
remotely via U-tec App.
3. What if I lost the paired smartphone?
Please go to www.u-tec.com/myutec.html or login U-tec App
via another smartphone to change your U-tec Account password.
4. How to adjust the lock orientation of U-Bolt Pro?
The lock orientation must be adjusted after installation to ensure
U-Bolt Pro works properly.
Solution 1. Adjust the lock orientation on the lock. Go to page 8
for details.
Solution 2. Adjust the lock orientation via U-tec App.
- 17 -