Chapter 2 Configuration; Running The Setup Wizard; Setting Up Through Setup Wizard - Buffalo TeraStation 3010 User Manual

Chapter 2 Configuration

Chapter 2 Configuration
Configure and manage your TeraStation using the Settings interface, accessible from a browser window. Open the
interface using the procedure below or type the TeraStation's IP address into the URL field of your browser.
Note: Microsoft Edge, Firefox, Google Chrome, Internet Explorer 9 or later, and Safari 9 or later are supported. If you
have difficulty viewing Settings, check the following:
• If there are a large number of registered users, groups, or shared folders, use another browser instead of Internet
Explorer.
• If you have a proxy server enabled in the browser settings, configure the exception settings for Settings or disable
the proxy server.
• With Internet Explorer, set security to Local intranet. On Windows Server operating systems, higher-level security
is configured by default. Set the security to a lower level temporarily.

Running the Setup Wizard

Setting Up Through Setup Wizard

When you access Settings for the first time, or after initializing the TeraStation's settings, the setup wizard will
automatically be displayed. To set up the TeraStation using the wizard, follow the procedure below.
1
Double-click the NAS Navigator2 icon (
2
Right-click your TeraStation's icon and select Settings. For macOS, select the TeraStation's icon while holding
down the control key, then select Settings.
) to start NAS Navigator2.
15