Resetting The Date And Time - Sony DCR-TRV120 Operating Instructions Manual

Resetting the date and time

The default clock setting is set to East Coast Standard Time.
The date and time are held in memory by the lithium battery. If you replace the lithium
battery with the battery pack or other power source connected, you need not reset the
date and time.
You must reset the date and time when the lithium battery becomes dead with no
power source installed.
First, set the year, then the month, the day, the hour and then the minute.
(1) While the camcorder is in the standby mode, press MENU to display the menu
settings.
(2) Turn the SEL/PUSH EXEC dial to select
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the menu settings disappear.
1,
MENU
7
4
2000 JAN 1 2000 JAN
12 00 AM 12 00 AM
The year changes as follows:
1999 ˜ 2000 N · · · · n 2029
If you do not set the date and time
"--- -- ----" "– –:– –:– –" is recorded on the tape and the "Memory Stick"
(DCR-TRV320 only).
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
•12:00 AM stands for midnight.
•12:00 PM stands for noon.
2
S E T U P M E N U
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
6
S E T U P M E N U
CLOCK SET
AUTO TV ON
TV INPUT
LTR SIZE
DEMO MODE
RETURN
1
[MENU] : END
, then press the dial.
S E T U P M E N U
JAN 1 1999
CLOCK SET
AUTO TV ON 1 2: 00:00 AM
TV INPUT
LTR SIZE
DEMO MODE
RETURN
[MENU] : END
S E T U P M E N U
CLOCK SET
AUTO TV ON
JUL 4
2000 TV INPUT
LTR SIZE
DEMO MODE
RETURN
5 30 PM
[MENU] : END
3
S E T U P M E N U
CLOCK SET
AUTO TV ON
JAN 1
1999
TV INPUT
LTR SIZE
DEMO MODE
RETURN
12 00 AM
[MENU] : END
JUL 4 2000
5: 30: 00 PM
71