Sony DCR-TRV120 Operating Instructions Manual page 66

Changing the menu settings
Icon/item
HiFi SOUND
TBC*
TBC stands for "Time Base Corrector".
DNR*
DNR stands for "Digital Noise Reduction".
AUDIO MIX
PB MODE
A/V t DV OUT
When you play back tapes recorded in the Hi8/standard 8 system only.
*
Notes on AUDIO MIX
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
•You can adjust the balance only for tapes recorded in the Digital8
Note on PB MODE
The mode will return to the default setting when:
– you remove the battery pack or power source.
– you turn the POWER switch.
66
Mode Meaning
z STEREO To play back a stereo tape or dual sound track
tape with main and sub sound
1 To play back a stereo tape with the left sound
or a dual sound track tape with main sound
2 To play back a stereo tape with the right sound
or a dual sound track tape with sub sound
z ON To correct jitter
OFF To not correct jitter. Set TBC to OFF when
playing back a tape on which you have dubbed
over and recorded the signal of a TV game or
similar machine.
z ON To reduce picture noise
OFF To reduce a conspicuous afterimage when the
picture has a lot of movement
To adjust the balance between the stereo 1 and
———
stereo 2
To automatically select the system (Hi8/
z AUTO
standard 8 or Digital8
record on the tape, and play back the tape
To play back a tape that was recorded in the
/
Hi8/standard 8 system when your camcorder
does not automatically distinguish the
recording system
To convert digital video signals into analog
z OFF
video signals via your camcorder.
To convert analog video signals into digital
ON
video siginals via your camcorder. "A/V t
DV" appears on the LCD screen or in the
viewfinder. (P. 59)
ST1 ST2
) that was used to
POWER
switch
VTR
VTR
VTR
VTR
VTR
VTR
system.