Playing Back A Tape With Digital Effects - Sony DCR-TRV120 Operating Instructions Manual

Playing back a tape with digital effects

During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial
(2) Press the SEL/PUSH EXEC dial.
(3) Turn the SEL/PUSH EXEC dial to adjust the effect.
1
DIGITAL
EFFECT
2
To cancel the digital effect function
Press DIGITAL EFFECT.
Notes
•The digital effect function works only for tapes recorded in the Digital8
•You cannot process externally input scenes using the digital effect function.
•You cannot record images that you have processed using the digital effect function
with this camcorder. To record images that you have processed using the digital effect
function, record the images on the VCR using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital effect function are not output through the DV IN/
OUT jack.
When you set the POWER switch to OFF (CHARGE) or stop playing back
The digital effect function is automatically canceled.
50
until the desired digital effect indicator (STILL, FLASH, LUMI. or TRAIL)
flashes.
The digital effect indicator lights up and the bars appear. In the STILL or
LUMI. mode, the image where you press the SEL/PUSH EXEC dial is stored in
memory as a still image.
For details of each digital effect function, see page 37.
STILL
2
3
STILL
system.