Sony DCR-TRV120 Operating Instructions Manual page 67

Changing the menu settings
Icon/item Mode
LCD B. L. z BRT NORMAL
LCD COLOR
CONTINUOUS*
z OFF
QUALITY* z FINE
FLD./FRAME* z FIELD
PRINT MARK* z OFF
PROTECT*
z OFF
SLIDE SHOW*
DELETE ALL*
FORMAT* z RETURN
PHOTO SAVE*
* DCR-TRV320 only
Notes on LCD B.L.
• When you select BRIGHT, battery life is reduced by about 10 percent during recording.
• When you use power sources other than the battery pack, BRIGHT is automatically
selected.
Notes on formatting
• Supplied or optional "Memory Stick"s have been formatted at factory. Formatting with this
camcorder is not required.
• Do not turn the POWER switch or press any button while the display shows
FORMATTING.
• You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick" is set
to LOCK.
• Format again if the message "
Formatting erases all information on the "Memory Stick"
Check the contents of the "Memory Stick" before formatting.
• Formatting erases sample images on the "Memory Stick."
• Formatting erases the protected image data on the "Memory Stick."
Meaning
To set the brightness on the LCD screen normal
BRIGHT To brighten the LCD screen
To adjust the color on the LCD screen, turning
the SEL/PUSH dial to adjust he following bar.
to lighten
Not to record continuously
MULTI SCRN To record 9 images continuously (p. 78)
To record still images in the fine image quality
mode, using the "Memory Stick"
STANDARD To record still images in the standard image
quality mode, using the "Memory Stick"
To record moving subjects
FRAME To record stopping subjects in high quality
To cancel print marks on still images.
ON To write a print mark on the recorded still
images you want to print out later
Not to protect still images
ON To protect selected still images against
accidental erasure (p. 97)
To play back images in a continuous loop
(p. 95)
To delete all the images (p. 99)
To cancel formatting.
FORMAT To format an inserted "Memory Stick."
1. Select FORMAT with the SEL/PUSH EXEC
dial, then press the dial.
2. Turn the SEL/PUSH EXEC dial to select
FORMAT, then press the dial.
3. After "EXECUTE" appears, press the SEL/
PUSH EXEC dial. "FORMATTING" appears
during formatting. "COMPLETE" appears
when formatting is finished.
To duplicate still images (p. 87)
" appears.
to darken
POWER
switch
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
VTR
67