Sony DCR-TRV120 Operating Instructions Manual page 70

Changing the menu settings
Icon/item
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
Note
If you press DISPLAY with DISPLAY set to "V-OUT/LCD" in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your
camcorder is connected to outputs on the TV or VCR. (Except when your camcorder is
connected with the i.LINK cable.)
In more than 5 minutes after removing the power source
The AUDIO MIX, COMMANDER and HiFi SOUND items are returned to their default
settings.
The other menu items are held in memory even when the battery is removed, as long as
the lithium battery is installed.
Notes on INDICATOR
• When you select BL ON, battery life is reduced by about 10 percent during recording.
• When you use power sources other than the battery pack, BL ON is automatically
selected.
70
Mode Meaning
——— To set the clock to the local time.
Turn the SEL/PUSH EXEC dial to set a time
difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the
originally set time.
z MELODY To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
NORMAL To output the beep instead of the melody
OFF To cancel all sound including shutter sound
z ON To activate the Remote Commander supplied
with your camcorder
OFF To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR's remote control
z LCD To show the display on the LCD screen and in
the viewfinder
V-OUT/LCD To show the display on the TV screen, LCD
screen and in the viewfinder
z ON To light up the camera recording lamp at the
front of your camcorder
OFF To turn the camera recording lamp off so that
the subject is not aware of the recording
z BL OFF To turn off the backlight on display window
BL ON To turn on the backlight
POWER
switch
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
CAMERA
MEMORY
VTR
CAMERA
MEMORY