Technical Specifications - Johnson Controls S321-IP Hardware Installation

S321-IP Network Controller
24-10239-480 Rev. F
See the diagram below for the Network menu navigation map:
IP SNMP
DHCP Enable
IP Address
Network Mask
Gateway
MAC Address
P2000 Host
Name
P2000 Host
IP Address
User Name
or IP
Name
T S
ECHNICAL PECIFICATIONS
The terminal is expected to operate at moderate temperature variation, non-
condensing humidity variation, moderate vibration, and possible dust
contamination.
Item
Input Power
Reader Interface
General Purpose Inputs Resistive load
Relay Outputs
Red LED/Green LED
Outputs
Communications
Certifications
Main Database
FTP
SNMP Agent
FTP Enable
Enable
System
Username
Information
and Password
Community
Traps
Configuration
Specification
+12 to +24 VDC or 16 to 24 VAC at 24W
• 2-wire Wiegand (up to 256 bits)
• 12 VDC, 250 mA (typical), 500 mA (peak)
• Red indicator
• Green indicator
1 A max. 0-24 VDC/VAC, 25 VA max
50 mA max. 0-24 VDC.
These open collector outputs can be damaged by alternating
current (AC) potentials as low as 1 VAC. Connect the LED
outputs only to direct current (DC) loads up to 24VDC.
10/100 Base-T Ethernet using TCP/IP protocol
• FCC, Class B
• CE Mark
• C-Tick
Network
SSL
Certificate
Private Key
Self-Signed
Certificate
19
Hardware Installation
HTTP
Timeout
Maximum Bytes
Allowed
Admin Account
User Account