Installation And Startup; Installation On The Floor; Installation On The Wall - Ecosoft AquaPoint FPV24520ECO User Manual

USER'S MANUAL. AQUAPOINT FILTER
9

3. INSTALLATION AND STARTUP

Thanks to its design, the filter can be both installed on the floor and hung on the wall.

3.1. INSTALLATION ON THE FLOOR

Install filter on a flat horizontal surface. Adjust the feet to get the
horizontal position.

3.2. INSTALLATION ON THE WALL

Make sure of the wall strength in the area where you are going to
install the system.
Install the mounting capable to sustain the weight of the system
with water (not less than 100 kg). Mounting is not supplied with
the product.
Screw out the feet from the filter base and screw them into special
points on the back side of the framework.
After hanging reach horizontal position of the cover by screwing the feet either in or out.
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2018