ResMed S9 Series User Manual page 7

Aircraft use
IEC 60601-1 classification
Notes:
•
The manufacturer reserves the right to change these specifications without notice.
•
Check with your clinician/service provider before using the SlimLine air tubing with devices other than the S9.
Symbols which appear on these devices
The following symbols may appear on your S9, power supply unit, air tubing or packaging.
Caution;
Class II equipment;
Part number;
Remove tub to fill;
Environmental information
WEEE 2002/96/EC is a European Directive that requires the proper disposal of electrical and electronic equipment.
These devices should be disposed of separately, not as unsorted municipal waste. To dispose of your device, you should
use appropriate collection, reuse and recycling systems available in your region. The use of these collection, reuse and
recycling systems is designed to reduce pressure on natural resources and prevent hazardous substances from
damaging the environment.
If you need information on these disposal systems, please contact your local waste administration. The crossed-bin
symbol invites you to use these disposal systems. If you require information on collection and disposal of your ResMed
device please contact your ResMed office, local distributor or go to www.resmed.com/environment.
Servicing
The S9 device is intended to provide safe and reliable operation when operated in accordance with the instructions
provided by ResMed. ResMed recommends that the S9 be inspected and serviced by an authorised ResMed Service
Centre if there is any sign of wear or concern with device function. Otherwise, service and inspection of the devices
generally should not be required during the five year design life of the device.
6
Read instructions before use;
Start/Stop;
Serial number;
China pollution control logo 1;
Medical-Portable Electronic Devices (M-PED) that meet the Federal
Aviation Administration (FAA) requirements of RTCA/DO-160F can be used
during all phases of air travel without further testing or approval by the
airline operator. ResMed confirms that the S9 meets RTCA/DO-160F
requirements.
Class II (double insulation), Type BF
Drip proof;
Manufacturer; European RoHS;
Direct current;
Not drip proof; Type BF equipment;
Lot number;
Lock/unlock;
China pollution control logo 2;