Socket CHS 7Ci Quick Start Manual page 10

Windows Mobile or PC
To pair the CHS with the PDA or PC: (required only the first time you connect)
For Windows Mobile, only the SoMo works in HID mode with the CHS.
1. Power on the CHS.
2. Scan this barcode to configure the CHS to work in HID mode for peripherals. The CHS
will beep 3 times.
3. Turn on Bluetooth on your PDA or PC and start a device search / add a new device.
4. In the list of found devices, select Socket CHS. If prompted for a passkey, enter 0000
(four zeroes). If prompted to select services, select Input Device.
5. After the CHS connects and is ready to scan barcodes, it will beep once.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new computer / device, you must first unpair the CHS. See page 4.
BlackBerry OS
SocketScan 10 software works with BlackBerry OS 5.0.0.714 or later for Bold 9700. Other
phones may be compatible. To install via BlackBerry Desktop Software, or for Bluetooth
HID instructions for the PlayBook, please refer to the User's Guide.
To install the software: On the phone, open
Follow the onscreen instructions to download and install the software.
To pair the CHS with the phone: (required only the first time you connect)
1. Power on the CHS. Scan this barcode to change the CHS to SPP mode. The CHS will
beep 3 times.
2. Use the phone's Bluetooth software to start a device search / add a device.
3. In the device list, select Socket CHS. If asked for a passkey, enter 0000 (four zeroes).
In the Home screen, click Downloads | SocketScan 10. If prompted to grant trusted
4.
application status, click Yes.
Click Menu | Socket EZ Pair. Click 1D Scanner. If prompted, select your CHS.
5.
6. After they pair and connect, the CHS will beep once to confirm the connection, then
beep twice to signal a disconnection. Click Menu | Close to close Socket EZ Pair.
SocketScan 10 will try to connect to the CHS. If asked to confirm, click Yes.
7.
8. After the CHS connects and is ready to scan barcodes, it will beep once.
Close Socket EZ Pair by clicking Menu | Close. The CHS registration screen will
9.
appear. Follow the instructions to register the CHS, or click Cancel to register later.
Now you are ready to scan barcodes, see instructions on page 4.
To connect to a new computer / device, you must first unpair the CHS. See page 4.
HID (Peripherals) Mode
SPP Mode
http://www.socketmobile.com/blackberry
Print page to scan.
Do not scan onscreen.
Print page to scan.
Do not scan onscreen.
10