Dubbing Only Desired Scenes - Digital Program Editing (On Tapes) - Sony DCR-PC115 Operating Instructions Manual

Dubbing only desired scenes
– Digital program editing (on tapes)
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on "Memory Stick"s. See p. 132 for more information.
Unwanted scene
Before operating the Digital program editing on tapes
recorded on other equipment
Step 1 Connecting the VCR (p. 69).
Step 2 Setting the VCR for operation (p. 70, 74).
Step 3 Adjusting the synchronization of the VCR (p. 75).
When you dub using the same VCR again, you can skip steps 2 and 3.
Using the Digital program editing function on tapes recorded
on other equipment
Operation 1 Making the program (p. 77).
Operation 2 Performing the program (dubbing a tape) (p. 79).
Notes
•When you connect with an i.LINK cable (DV connecting cable), you may not be able to
operate the dubbing function correctly, depending on the VCR.
Set CONTROL to IR in the menu settings of your camcorder.
•When editing digital video on tapes, the operation signals cannot be sent with
LANC.
Step 1: Connecting the VCR
You can connect both an A/V connecting cable and an i.LINK cable (DV connecting
cable).
When you use the A/V connecting cable, connect the devices as illustrated on page 67.
When you use an i.LINK cable (DV connecting cable), connect the devices as illustrated
on page 68.
If you connect using an i.LINK cable (DV connecting cable)
With digital-to-digital connection, video and audio signals are transmitted in digital
form for high-quality editing.
Unwanted scene
Switch the order
69