To Display The Screen Indicators - Display Function - Sony DCR-PC115 Operating Instructions Manual

Playing back a tape
If you leave the power on for a long time
Your camcorder gets warm. This is not a malfunction.
When you open or close the LCD panel
Open or close the LCD panel vertically.
To display the screen indicators – Display function
Press DISPLAY. The indicators appear on the screen. To make the indicators disappear,
press DISPLAY again.
DATA CODE
About date/time and various settings
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Use the Remote Commander for this operation.
1 Set the POWER switch to VCR, then playback a tape.
2 Press DATA CODE on the Remote Commander.
The display changes as follows:
date/time t various settings (SteadyShot, exposure, white balance, gain, shutter
speed, aperture value) t no indicator
[a] Tape counter
[b] SteadyShot OFF
[c] Exposure mode
[d] White balance
[e] Gain
[f] Shutter speed
[g] Aperture value
Not to display various settings
Set DATA CODE to DATE in the menu settings (p. 96).
The display changes as follows when you press DATA CODE on the Remote
32
Commander: date/time y no indicator
Date/time
40min
0:00:23:01
JUL 4 2001
12:05:56 AM
DISPLAY
Various settings
40min
0:00:23:01
AUTO
60 AWB
F1.8 9dB
DISPLAY
[a]
[b]
[c]
[d]
[e]
[f]
[g]