Recording An Image From A Tape As A Still Image - Sony DCR-PC115 Operating Instructions Manual

Recording an image from a tape as a still
image
Your camcorder can read moving picture data recorded on a tape and record it as a still
image on a "Memory Stick." Your camcorder can also take in moving picture data
through the input connector and record it as a still image on a "Memory Stick."
Before operation
•Insert a recorded tape into your camcorder.
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. The picture recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
CAPTURE appears on the screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on a
"Memory Stick." Recording is complete when the bar scroll indicator
disappears.
3
Image size of still images
Image size is automatically set to 640 480.
When the access lamp is lit or flashing
Do not shake or strike the unit. As well do not turn the power off , eject a "Memory
Stick." Otherwise, the image data breakdown may occur.
If "
The inserted "Memory Stick" is incompatible with your camcorder because its format
does not conform with your camcorder. Check the format of the "Memory Stick."
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
118
PHOTO
" appears on the screen
2
REW
4
CAPTURE
PHOTO
PLAY FF