Recording Superimposed Images On A Tape - Sony DCR-PC115 Operating Instructions Manual

Superimposing a still image in the "Memory Stick" on an image
– MEMORY MIX

Recording superimposed images on a tape

Before operation
• Insert a tape for recording into your camcorder.
• Insert a "Memory Stick" recorded still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in the standby mode.
(3) Press MEMORY+/– to select the still image you want to superimpose.
(4) Select the desired mode with the control button.
(5) Press z on the control button.
(6) Press b/B on the control button to adjust the effect.
(7) Press START/STOP to start recording.
122
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
The still image is superimposed on the moving image.
M. CHROM – The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
M. LUMI – The color (bright) scheme of the area in the still image which
is to be swapped with a moving image
C. CHROM – The color (blue) scheme of the area in the moving image
which is to be swapped with a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.