Erasing The Program You Have Set; Erasing All Programs - Sony DCR-PC115 Operating Instructions Manual

Dubbing only desired scenes – Digital program editing (on tapes)

Erasing the program you have set

Erase OUT first and then IN from of the last program.
(1) Select and decide upon UNDO with the control button.
(2) Select and decide upon EXECUTE with the control button.
To cancel erasing
Select and decide upon RETURN with the control button in step 2.

Erasing all programs

(1) Select and decide upon VIDEO EDIT in the menu settings, then select and
(2) Select and decide upon ERASE ALL, then select and decide upon EXECUTE
To cancel erasing all programs
Select and decide upon RETURN with the control button in step 2.
To cancel a program you have set
Press MENU.
The program is stored in memory until the tape is ejected.
Note
You cannot operate recording during the Digital program editing.
On a blank portion of the tape
You cannot set IN or OUT on a blank portion of the tape.
If there is a blank portion between IN and OUT on the tape
The total time code may not be displayed correctly.
78
The last set program mark flashes, then the setting is canceled.
decide upon TAPE with the control button.
with the control button.
All the program marks flash, then the settings are canceled.