Searching For A Photo Without Using Cassette Memory; Scanning Photo - Sony DCR-PC115 Operating Instructions Manual

Searching for a photo – Photo search/Photo scan

Searching for a photo without using cassette memory

(1) Set the POWER switch to VCR.
(2) Press MENU, then select and decide upon CM SEARCH in
control button (p. 96).
(3) Press SEARCH MODE on the Remote Commander repeatedly until the
PHOTO SEARCH indicator appears.
The indicator changes as follows:
(4) Press . or > on the Remote Commander to select the photo for playback.
Each time you press . or >, your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.
To stop searching
Press x.

Scanning photo

(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
PHOTO SCAN indicator appears.
The indicator changes as follows:
(3) Press . or > on the Remote Commander.
Each photo is played back for about five seconds automatically.
3
To stop scanning
Press x.
If a tape has a blank portion between recorded portions
The photo search/photo scan function may not work correctly.
The available number of photos that can be searched using the cassette memory
The available number is up to 12 photos. However, you can search 13 photos or more
66
using the scanning photo function.
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t no indicator
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t no indicator
to OFF with the
2
SEARCH
MODE PHOTO 0 0
SCAN