Playing The Picture On A Tv - Sony Handycam DCR-PC108E Operation Manual

Playing the picture on
a TV
S VIDEO jack
Signal flow
* By using an S video cable (optional), higher quality
DV format pictures can be produced.
When there is an S video jack on the device to be
connected, connecting the S video cable (optional)
to the S video jacks on both your camcorder and the
device instead of using the yellow plug is
recommended. The audio will not be output when
you connect with the S video plug alone.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE.
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V connecting
cable to the video input jack and connect the
white or the red plug to the audio input jack of
your TV or VCR.
When you want to play the sound in monaural
mode, use a connecting cable (optional) for that
purpose.
A/V jack
A/V connecting cable (supplied)
Connect your camcorder via the Handycam
Station or the A/V jack of your camcorder to
a TV using the supplied A/V connecting
cable.
Connect the supplied AC Adaptor to the wall
socket for the power supply (p. 16).
Refer also to the instruction manuals supplied
with the devices to be connected.
To copy to another tape, see page 93.
Yellow
White
Red
If your TV/VCR has a 21-pin connector
(EUROCONNECTOR)
Use the 21-pin adaptor supplied with your
camcorder (For models with the
printed on their bottom surfaces only). This
adaptor is designed for output use only.
b Note
• Do not connect A/V connecting cables to both your
camcorder and the Handycam Station. The image
might be distorted.
IN
VCRs or TVs
mark
TV/VCR
Playback
59