Lan Settings - Cisco UC320W Pre-Installation Site Information

LAN Settings

LAN
Data VLAN: Circle one.
Use System Default Settings
If Custom, enter the following required settings:
IP Address:
Subnet Mask: 255.255.255.
Default Gateway:
DHCP Address Range:
Starting IP Address: x.x.x.
Ending IP Address: x.x.x.
Voice VLAN: Circle one.
If Custom, enter the following required settings:
IP Address:
Subnet Mask: 255.255.255.
Default Gateway:
DHCP Address Range:
Starting IP Address: x.x.x.
Ending IP Address: x.x.x.
NOTE
The Voice VLAN ID is 100. If you are including an Ethernet switch in this installation, configure this Voice VLAN for all voice
ports on the switch.
Use Custom Settings
(Default: 255.255.255.0)
(Default: x.x.x. 1 1)
(Default: x.x.x.254)
Use System Default Settings
(Default: 255.255.255.0)
(Default: x.x.x.254)
Use Another DHCP Server for Data VLAN
(Default: 192. 1 68. 1 0. 1 )
(Default: 192. 1 68. 1 0. 1 )
Use Custom Settings
(Default: 10. 1 . 1 . 1 )
(Default: 10. 1 . 1 . 1 )
(Default: x.x.x. 1 1)
Pre-Installation Workbook
6