Cisco UC320W Pre-Installation Site Information page 7

Wireless Network
Wireless VLAN
Enter the settings for the
wireless Data and
wireless Voice VLANs.
Data:
Enable Wireless?
VLAN? Circle one:

Yes No
Voice:
Enable Wireless
VLAN? Circle one:

Yes No
Network Name (SSID)
If enabling this VLAN, enter
information for each bulleted
item below.
•
SSID:
(1-31 characters)
•
Broadcast SSID?

Yes
No
•
SSID:
(1-31 characters)
•
Broadcast SSID?

Yes
No
Security Strength
Circle one.

Higher security (WPA2)
Compatibility with older
devices (WEP)
None (not recommended)

Higher security (WPA2)
Compatibility with older
devices (WEP))
None (not recommended)
Pre-Installation Workbook
Security Key or PassPhrase
Enter a valid key. Requirements
are noted.
Key:
WEP: Requires 10 or 26 hex
digits (a-f, 0-9)
WPA2-Personal: Requires 8 to
63 characters (Use a strong
password with at least 8
characters.)
WEP: Requires 10 or 26 hex
digits (a-f, 0-9). If both Data and
Voice use WEP, key must be the
same.
WPA2-Personal: Requires 8 to
63 characters (Use a strong
password with at least 8
characters.)
7