Download Print this page

Varad i-Security-Touch VS-702 User Manual page 8

Advertisement

Press
to activate channel 5, remote Output pulse time of channel 5 is programmable
function (program feature D-1).
22. Channel 6
Press
to activate channel 6, remote Output pulse time of channel 6 is programmable
function (program feature D-2).
23. Panic
In arm or disarm mode and ignition key is off.
Press button
siren will
sound and parking lights flash for 30 sec. Press button
stopping alarm mode. (System stays at arm mode).
24. Anti-hijack mode
Ignition must be ON and all doors closed.
Press button
anti-hijack mode. Parking lights flash once, LED start to flash rapidly.
To deactivate anti-hijack mode press button
After 30 sec system enter arm with alarm modes, stopping alarm and disarm by transmitter is
disable. To deactivate anti-hijack mode enter PIN-cod only or follow up override steps.
25. Valet mode
At valet mode system can be remote door lock / unlock, activate channels. No any protect
function.
Enter and exit Valet mode procedure:
Be sure the system is disarmed.
Turn the ignition key on.
Press and hold the valet switch for 3 seconds.
The siren will chirp once to enter valet or twice for exit.
The LED will turn on solid indicating the system is in valet mode, or turn off indicating
26. Override
Enter the vehicle
Turn the ignition key on.
Press and hold the valet switch for 3 seconds.
The siren will stop sounding.
The starter defeat is deactivated.
27. Pin code procedure
hold 2 sec ,system enter panic mode. System arm (with doors locking),
, (or press override button once then open and close door) to activate
or
or enter PIN-cod.
8
during 30 sec to

Advertisement

loading