Advertisement
Button
Default setting
ACC output
When remote
start success
F1
TURBO off
F2
Running time of
Arm with engine
F3
running
15 min.
Temperature-
control starting
OFF
F4
RETURN TO FACTORY DEFAULT SETTING
- turn off ignition
- press override button 3 times
- turn on ignition
- parking lights flash and siren chirps 3 times
- push the Valet Switch 13 times.
- 3 long chirp is heard,
You are now in the "Return to factory default setting" programming mode.
Press and release the transmitter button
confirm the system "feature A,B,C&D programming all return to factory default setting".
Press and release the transmitter button
confirm the system "feature E&F programming all return to factory default setting".
Press and release the transmitter button
confirm the system "pin code return to factory default setting".
Exit feature programming: After 20 sec or turning off ignition system will get out the feature
programming setting procedure, parking lights flash 4 times.
ACC output
ACC output
When hood
When hood
temperature 50℃
temperature 70℃
Turbo timer
Turbo timer
1 min.
3 min.
Running time of
Running time of
Arm with engine
Arm with engine
running
running
30 min.
45 min.
Temperature-
Temperature-
control starting
control starting
ON at -5℃
ON at -10℃
, there will be a confirmation 1 short chirps to
, there will be a confirmation 2 short chirps to
, there will be a confirmation 3 short chirps to
18
ACC output
5 min before
engine shut
down
Turbo timer
6 min.
Running time of
Arm with
engine running
no limit.
Temperature-
control starting
ON at -20℃
Advertisement
