Advertisement
Exit feature programming: After 20 sec or turning off ignition system will get out the feature
programming setting procedure, parking lights flash 4 times.
Press
one chip
Transmitter
LED 1 pulse
Button
Default setting
CH5
For ACC output
D1
CH6
For IGN3 output
D2
Trunk pop no
disarm
D3
ENABLE
Remote start and
Engine Running
D4
as long as "+" or
"-" Brake input
FEATURE "E" PROGRAMMING
- turn off ignition
- press override button 3 times
- turn on ignition
- parking lights flash and siren chirps 3 times
- push the Valet Switch 9 times.
- one long chirp with 9 short chirps is heard.
You are now in the start feature "E" programming mode.
- press and release the transmitter button corresponding
to the feature you want to program.
Exit feature programming: After 20 sec or turning off ignition system will get out the feature
programming setting procedure, parking lights flash 4 times.
Press
one chip
two chip
three chip
LED 2 pulse
LED 3 pulse
CH5
CH5
for channel output
for channel output
=30s pulse
= latched output
and reset with
IGN on
CH6
CH6
for channel output
for channel output
=latched output
= latched output
and reset with
IGN on
Trunk pop with
disarm
DISABLE
Remote start and
Engine Running
as long as "+" or
"-" Brake input
two chip
three chip
16
four chip
LED 4 pulse
CH5
for channel output
=1s pulse
CH6
for channel output
= 1s pulse
four chip
Advertisement
