Advertisement
When system is alarming or after disarming, if the LED quick flashes several times and then 1
second pauses, it indicates the system has been triggered, and the times the LED flashes
indicate the zone that was triggered, as below:
Twice: AUX 4 PIN 1 heavy trigger
3 times: AUX 4 PIN 2 heavy trigger
4 times: TRUNK
5 times: DOOR
6 times: HOOD
7 times: IGN
7. Arm without ZONE
Press button
build in shock sensor will be bypassed, other sensor is normal.
Aux sensor 1 and sensor 2 will be bypassed, other sensor is normal.
8. Arm with engine running
While engine is running and the key at ignition ON position press button
lights flash, transmitter sounds. Then get out ignition key (engine goes on running! hand brake
must be pull up). Press button
will be running 15, 30, 45 or unlimited time period (according the program features F-3) then
shut down and system. Shock sensor is bypassed at this period.
Press button
once to shut down engine. Parking flash once for confirm.
Engine also shut down when alarm.
9. Auto rearm
System will be rearm and relock if no any door (or trunk) opens or ignition key turn on within
30 seconds after disarmed. It's programmable function – see program features B-1.
10. Passive arming / Arming reminder
Ignition is off after driving, open the door, leave out and close it. the system will
automatically armed after 30 sec. Passive arming still no lock door. It's programmable
function – see program features B-2
11. Immobilizer
At immobilizer mode system automatically enter starter disable relay (w/o arm) after 30 sec
from ignition turn off. At this mode LED flash when ignition ON.
12. Two-Stage unlock
Press button
, once to set arming, siren chirp, parking lights flash once,
system will chirp once, parking lights flash once. Engine
will unlock driver's door only. Hold button
6
, parking
for 2 seconds or press
Advertisement
