Advertisement
Exit feature programming: After 20 sec or turning off ignition system will get out the feature
programming setting procedure, parking lights flash 4 times.
Press
one chip
Transmitter
LED 1 pulse
Button
Default setting
Auto rearm off
B1
passive arming
off
B2
Immobilizer
mode off
B3
Anti-jack off
B4
FEATURE "C" PROGRAMMING
- turn off ignition
- press override button 3 times
- turn on ignition
- parking lights flash and siren chirps 3 times
- push the Valet Switch 5 times.
- one long chirp with 5 short chirps is heard.
You are now in the start feature "C" programming mode.
- press and release the transmitter button corresponding
to the feature you want to program.
two chip
three chip
LED 2 pulse
LED 3 pulse
Auto rearm on
Auto rearm on
without lock
with lock
Passive arming on
Passive arming on
without lock
with lock
Immobilizer
mode on
Anti-jack on
14
four chip
LED 4 pulse
Advertisement
