Advertisement
Exit feature programming: After 20 sec or turning off ignition system will get out the feature
programming setting procedure, parking lights flash 4 times.
Press
one chip
Transmitter
LED 1 pulse
Button
Default setting
CH1
For trunk release
each output 1s
C1
when active.
CH2
nd
for 2
Hold button 2
C2
2second to active
CH3
For dome light
C3
CH4
For Car HORN
output
C4
FEATURE "D" PROGRAMMING
- turn off ignition
- press override button 3 times
- turn on ignition
- parking lights flash and siren chirps 3 times
- push the Valet Switch 7 times.
- one long chirp with 7 short chirps is heard.
You are now in the start feature "D" programming mode.
- press and release the transmitter button corresponding
to the feature you want to program.
two chip
LED 2 pulse
CH1
for channel output
each output 30s
when active.
CH2
nd
Unlock
for 2
Unlock
Press button 2
2 times to active
CH3
for channel output
= latched output
and reset with
IGN on
CH4
For window close
Each output 1s ,
When arming .
three chip
LED 3 pulse
CH1
for channel output
=latched output
CH2
for OEM
DISARM
CH3
for channel output
each output 1s
when active.
CH4
for OEM
REARM
15
four chip
LED 4 pulse
CH1
for channel output
= latched output
and reset with
IGN on
CH2
for channel output
each output 30s
when active.
CH3
for channel output
each output 30s
when active.
CH4
for channel output
each output 30s
when active.
Advertisement
