Advertisement
36. Wires description
1 black loop for select type of gear
not cut – auto gear
cut – manual gear
Set handset PIN code:
To check whether the PIN code is right or wrong, can press P1K2, P9K2 to check, if the PIN
code is correct then can go to the next step. Before PIN code setting, need to check and see top
right side of screen will show ***PIN, after entered the correct PIN code, will show *** 1ST on the
top right side, means in the first entering status, after setting, will show ***2ND, second entering
status, if same as the first setting will display SAVE the PIN code and return to P4, if not the same
will display ERROR and return to P4, if lose the PIN code can read out through the data wire from
PC. PIN code will be cancelled if set PIN code to 000000.
19
Advertisement
