If You Cannot Install The Usb Driver - Sony DCR-TRV Operating Instructions Manual

Connecting your camcorder to your computer using the USB cable
– For Windows users

If you cannot install the USB driver

The USB driver has been registered incorrectly as your computer was connected to your
camcorder before installation of the USB driver was completed. Perform the following
procedure to correctly install the USB driver.
Viewing images recorded on a tape
Step 1: Uninstall the incorrect USB driver
1 Turn on your computer and allow Windows to load.
2 Connect the AC power adaptor, and set the POWER switch to VCR.
3 Connect the USB jack on your computer to the
using the USB cable supplied.
4 Open your computer's "Device Manager".
Windows XP Home Edition/Professional:
Select "Start" t "Control Panel" t "System" t "Hardware", and click the
"Device Manager" button.
If there is no "System" inside "Pick a category" after clicking "Control Panel",
click "Switch to classic view" instead.
Windows 2000 Professional:
Select "My Computer" t "Control Panel" t "System" t "Hardware" tab,
and click the "Device Manager" button.
Windows 98SE/Windows Me:
Select "My Computer" t "Control Panel" t "System", and click "Device
Manager".
5 Select and delete the underlined devices.
162
Windows 98SE
(USB) jack on your camcorder
Windows Me